New shoes!

New shoes!

Since I will be converting the car to Porsche 5 bolt pattern I needed new wheels. Ideally I’d want a nice set of 16×7″ Fuchs but with prices for a used set in need of some overhaul starting around €1000 I went for the second choice of ATS Cookiecutters in 15×7″ size.

READ MORE
Body back and in work…

Body back and in work…

I got the body back, the good news is that it wasnt very out of alignment but the front right suspension tower was sitting about 8 mm’s too far outwards so it was pulled back to the correct position. First piece of fender going back on, a few small spot welds to keep it in...

READ MORE
Little works of art

Little works of art

I got a package from the US containing the new bushings for the front and rear suspension. They are Polybronze bushings from Elephant Racing and they are absolutely beautiful. The front and rear suspension arms are all cleaned up and ready to go out for mediablasting and powdercoat.

READ MORE
Steering rack overhaul.

Steering rack overhaul.

While the chassis is getting its back straightened I’ve started to fix some of the parts that will go back on it. First out was the steering gear. I had already bought new steering arms from the 911 turbo (930) to go on it and a coupld of washers to move the entire rack upwards...

READ MORE
Curse of previous owners, part II.

Curse of previous owners, part II.

Well after fixing the damage to the front right strut tower I started measuring the front end to see if there was any other damage that I could find. The bottom of the car seemed pretty straight but the front right tower seemed a little off so I’ve hauled the body off to Lars at...

READ MORE
New rear jack plates

New rear jack plates

Todays work was alot about prepping for welding and finally doing some welding. The areas where the new jack plates connects to the body was media blasted and painted with a weldthru primer (the blue stuff) The same paint was applied to the jackplates where there will be metal to metal contact and subsequently hard...

READ MORE
The curse of previous owners…

The curse of previous owners…

I’ve mentioned before that the cars has been crashed in the right front at some time, today it was time to tackle some of the remains of that. This is what the left strut tower looks like. …and here’s the right one. It seems that someone at some point thought it would be better to...

READ MORE

Rear floor cleanup

Today I spent some time cleaning up the rear floor and engine bay from old greasy dirt and built up crud, found a rustspot in the trunk floor that had been overlooked so that took some time to fix. I also drilled out the remains of the brackets for the muffler heat shield. Here’s a...

READ MORE