July catchup post.
I’ve been on vacation for the last few weeks and managed to squeese in a few hours of garagetime most days so here’s a quick catchup post. Carbuilderselfie! Not the most comfortable position but needed when it comes to installing…
Read more
Major milestone reached!
Well after changing the gearboxmounts there wasnt anything really holding me back from taking the next step… Raising the rear up the car body about 50 mm more and tilting it so one side was about 70-80 mm higher than…
Read more
Engine being prepared for new injection system.
First batch of parts needed for the engine upgrade came from Mario at thedubshop.net. Very quick service and top notch quality parts. In the Picture is the crank trigger Wheel with sensor and sensor bracket, the IAT-Intake air temp sensor…
Read more
Martini Racing takes the win!
Together with adhesive and vinyl expert Pontus it was time to lay down some stripes! First red stripe went on easily…then it got tricker as the vents below the windscreen and the popup headlight made things a bit more difficult….
Read more
Shaken, not stirred…
Trying a few different layouts with my Martini Racing decals. Horizontal Tilted… Vertical…
South Sweden 914 meeting.
On the 9th of May I drove 400 km’s South to outside the Town of Ystad to attend a 914 meeting, seeing how 914’s are pretty rare here it was an opportunity not to be missed. After four hours driving…
Read more
May update – old sins and lights in the end of the tunnel.
So, its May 2015 and its time for an update which covers the reveal of old sins and some lights at the end of the tunnel….is it a high speed freight train? So lets deal with the old sin first,…
Read more
Early April update.
The last month has been pretty busy so here’s another update of most whats happen since the last one. I have testfitted all the carpets. Finally starting to feel like a car. Rear brake calipers have been assembled again. Rear…
Read more
Door drain holes – helping others…
This post is just to display some measurements on the door drain holes to help another 914 owner. The c-c distane between the holes on my doors was 360 mm between the rear hole and middle hole, and 363 mm…
Read more
February update
Headlights have been taken apart, mediablasted, painted, reassembled and installed, right side. ..and left. Rear lights have been cleaned up and gotten new seals between lens and housing and between housing and car body. The lenses need to be polished…
Read more