Project SuperFive is roadlegal !

Project SuperFive is roadlegal !

2023-05-23 was the day when the poject was towed to Gothenburg for its final inspection. Apart from the headlights being pointed a little low (which was fixed right there) it passed with flying colours. The leather steering wheel was changed back to the wooden one after registration, still undecided which one I actually prefer. I...

READ MORE
Close to the finish line.

Close to the finish line.

So as the check lists started to have all their boxes ticked it was time for the complete build inspection. For this I had to bring the car to the Inspection. There we went over the car, checked off the fixes I had done since the rolling chassis inspection. Brakes were tested, looking for leaks...

READ MORE
The finishing touches before registration.

The finishing touches before registration.

So its time to put the finishing touches on the car like the front indicators, front park lights and headlights. Also the rearview mirrors need to be added. Both the front indicators and headlights are motorcycle parts that also have the right markings to use on a car. Another thing that is still to be...

READ MORE
Finishing up the rear end.

Finishing up the rear end.

Time to finish up the rear end. Before that I need to do something about the holes underneath the roll hoops. Using some leftover leather from the seats I made these pieces, rolling the long edges over and stitching them to get a nicer look. Six push buttons will hopefully keep them in place even...

READ MORE
Making the rear fenders.

Making the rear fenders.

After newyears it was time to tackle one of the last big items of this build. From the start I had planned for the rear fenders to be fixed to the rear hubs and be moving as the suspension moved. As the body came into being the space for any fender supports shrunk to almost...

READ MORE
Leather interior.

Leather interior.

Time to get started covering up the old 914 glas fibre seats. I could not reuse the old upholstry as it was too padded outwards and made the seats to wide to fit into the car. Time to strip everything back and start over. The goal was to make leather seat covers that could easily...

READ MORE
Small miscellaneous jobs

Small miscellaneous jobs

A bunch of smaller jobs that doesnt really fit into the other posts. Alternator bracket and tensioner. I’m reusing the stock 850 alternator despite it being quite large and heavy but I had it (no extra cost), I know it works. The tensioner is just two rose joints and a steel tube with a left...

READ MORE