Author Archive: admin
Engine temperature
So when I bought the MaxxEcu almost a year ago now I also went ahead and bought two Type-K temperature sensors to be fitted underneath the spark plugs. I figured I wouldnt need them for the first iteration of the…
Read more
End of 2015 catchup post.
Hello…its that damn lazy 914 owner writing again. Hasnt been much updates here has it? I started doing all the engine electrics in september and then we suffered a water leak in the house so that took alot of energy,…
Read more
Another set of wheels!
After looking at different adds for wheels the last year I finally found a set of mesh wheels that ticked all my criteria. Mesh design 4 wheels in 7×15 size et ~20 Good condition. (These are almost new) Affordable …
Read more
Moving forwards…
Foglights ready to be assembled with new seals from SierraMadre. The reflectors arent great but they’ll have to do for now. Will only be using the foglights for DRL’s anyway. And the foglights are working after some faultfinding. The fogs…
Read more
July catchup post.
I’ve been on vacation for the last few weeks and managed to squeese in a few hours of garagetime most days so here’s a quick catchup post. Carbuilderselfie! Not the most comfortable position but needed when it comes to installing…
Read more
Major milestone reached!
Well after changing the gearboxmounts there wasnt anything really holding me back from taking the next step… Raising the rear up the car body about 50 mm more and tilting it so one side was about 70-80 mm higher than…
Read more
Engine being prepared for new injection system.
First batch of parts needed for the engine upgrade came from Mario at thedubshop.net. Very quick service and top notch quality parts. In the Picture is the crank trigger Wheel with sensor and sensor bracket, the IAT-Intake air temp sensor…
Read more
Martini Racing takes the win!
Together with adhesive and vinyl expert Pontus it was time to lay down some stripes! First red stripe went on easily…then it got tricker as the vents below the windscreen and the popup headlight made things a bit more difficult….
Read more
Shaken, not stirred…
Trying a few different layouts with my Martini Racing decals. Horizontal Tilted… Vertical…
South Sweden 914 meeting.
On the 9th of May I drove 400 km’s South to outside the Town of Ystad to attend a 914 meeting, seeing how 914’s are pretty rare here it was an opportunity not to be missed. After four hours driving…
Read more